Canon Pixma MP988 Driver Free Download-Canon Pixma MP988 Obtain The handles contain Cannonis click-wheel,which can be employed to search many selections, and substantial,obvious changes for unique characteristics.The reader itself is just a regular A4,glass flatbed in addition to not utilizing an automated document Feeder.Throughout the reader address,though that,is just a removable cell which provides an openness as well as terrible operator,which may be set on the flatbed for large-option checking of final press.
Canon PIXMA line models used five-color printer with 1pl and eight,600 x-2,400 dpi quality,in many cases are competing six-shade printers.The clean PIXMA MP988 provides personal fresh picture grey ink container towards the printer to enhance the T&WATTS picture publishing,obviously present the shaded and gleaming room and extra enhance the gradation and modify color distortion.
Canon Pixma MP988 also economical with amazing publishing abilities, really encouraging in achieving the requirement to get a quicker,ideal and saturated in quality, additionally you'll discover all of the requirements which are exceptional within this device,and it’s amazing.with exceptional decision and cost more document which means you don't have to substitute the printer,and Canon Pixma MP988 Driver Download Support–is simple additionally in changing the tattoo,you are able to relate solely to a hardware wire as well as reveal the community with people in need.with the end result that's been demonstrated to function as the greatest as well as for the publishing of luxury-class you Will find with this printer device.
General Specifications
- Printing resolution(dpi) 9600 (horizontal)* x 2400 (vertical) * Ink droplets can be placed with a pitch of 1/9600 inch at minimum.
Interface
- USB Port: Hi-Speed USB*1
- Direct Print Port: PictBridge IrDA IR *2
- Bluetooth v2.0 (Option) *3 *4 *5
- USB flash drive
- LAN Port:
- Wired LAN: 100BASE-TX/10BASE-T
- Wireless LAN: IEEE802.11b/IEEE802.11g *6
- *1 A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.
- *2 Maximum speed: 115.2 Kbps Operating range: within 30 cm
- *3 Maximum speed: 1.44 Mbps
- *4 JPEG/PNG only
- *5 Bluetooth connection is for printing only.
- *6 Setup possible through WPS (Wi-Fi Protected Setup) and WCN (Windows Connect Now).
Print width
- 8 inches /203.2 mm (for Borderless Printing: 8.5 inches/216 mm)
Acoustic noise level
- Approx. 44.5 db(A) * When printing in the standard print quality mode on Photo Paper Plus Glossy II)
Operating environment
- Temperature: 5 to 35°C (41 to 95°F) Humidity: 10 to 90% RH (no condensation)
Storage environment
- Temperature: 0 to 40°C (32 to 104°F) Humidity: 5 to 95% RH (no condensation)
Power supply
- AC 100-240V, 50/60 Hz
Power consumption
- Printing (Copy): Approx. 27 W Standby (minimum): Approx. 2.7 W * OFF: Approx. 0.8 W * * USB connection to PC
Eternal dimensions
- Approx. 18.5 (W) x 15.2 (D) x 7.9 (H) inches Approx. 470 (W) x 385 (D) x 199 (H) mm * With the Paper Support and Paper Output Tray retracted.
Weight
- Approx. 10.7 kg (Approx. 23.6 lb) * With the Print Head and ink tanks installed.
Print Head/Ink
- Total 6,144 nozzles (PgBK 512 nozzles, Y/DyeBK each 512 nozzles, C/M/Gy each 1536 nozzles)
Copy Specifications
- Multiple copy Max 99 pages
- Intensity adjustment 9 positions, Auto intensity (AE copy)
- Reduction/Enlargement 25%-400% (1% unit)
Scan Specifications
- Scanner driver TWAIN/WIA (Windows Vista and Windows XP only)
- Maximum scanning size A4/Letter, 8.5'' x 11.7''/216 x 297 mm
- Scanning resolution Optional resolution (horizontal vertical) max: 4800 dpi x 9600 dpi Interpolated resolution max: 19200 dpi x 19200 dpi
- Gradation (Input/Output) Gray: 48 bit/8 bit (Film Scan: 48 bit/16 bit or 8 bit) Color: 48 bit/24 bit (RGB each 16 bit/8 bit) (Film Scan: 48 bit/48 bit or 24 bit)
Network Specifications
- Communication protocol TCP/IP
Wireless LAN
- Supported Standards: IEEE802.11g/IEEE802.11b
- Transfer speed:
- IEEE802.11g: 6/9/12/18/24/36/48/54 Mbps
- IEEE802.11b: 1/2/5.5/11 Mbps
- Frequency bandwidth *1: 2.412 GHz-2.462 GHz or 2.412 GHz-2.472 GHz
- Channel *1: 1-11 or 1-13
- Communication distance: Indoors 50 m *2
- Security: Encryption by WPA-PSK, WPA2-PSK, or WEP (64/128bits), and access control by passwords
- *1 Frequency bandwidth and available channels differ depending on country or region.
- *2 Effective range varies depending on the installation environment and location.
Wired LAN
- Supported Standards: IEEE802.3u (100BASE-TX)/ IEEE802.3 (10BASE-T)
- Transfer speed: 10M/100Mbps (auto switching)
Canon PIXMA MP988 Operating System Compatibility
Windows 10 / Windows 10 (x64) / Windows 8.1 / Windows 8.1 (x64) / Windows 8 / Windows 8 (x64) / Windows 7 / Windows 7 (x64) / Windows Vista / Windows Vista (x64) / Macintosh / Mac OS X (10.8/10.9/10.10/10.11/10.12) / Linux
Canon Pixma MP988 Driver Free Download
www.driverstool.com provide a download link for Canon PIXMA MP988 Series publishing directly from Canon website with easy-to-download, to get the download link can be found below.
Operating System | Download |
|---|---|
PIXMA MP988 series Mini Master Setup (Windows 8.1 x64/8 x64/7 x64/Vista64) | |
| PIXMA MP988 series Mini Master Setup (Windows 8.1/8/7/Vista/XP/2000) | |
| PIXMA MP988 series MP Driver (Windows 8.1/8/7/Vista/XP/2000) | |
| PIXMA MP988 series MP Driver (Windows 8.1 x64/8 x64/7 x64/Vista x64) | |
| PIXMA MP988 series XPS Printer Driver (Windows 8.1/8/7/Vista) | |
| PIXMA MP988 series XPS Printer Driver (Windows 8.1 x64/8 x64/7 x64/Vista64) | |
| PIXMA MP988 series Scanner Driver (OS X 10.5/10.6/10.7/10.8/10.9) | |
| MP Navigator EX 2.0 Opener (OS X 10.7/10.8/10.9) |
Steps by Step to Install Canon PIXMA MP988
Method 1: Installing Canon PIXMA MP988 by Downloading the Software for Free
For the first method, you will need to try installing the software for your PIXMA MP988 without using the automatic wizard that you usually get from the CD.
The things that you need are:
- The first of all, you will need the setup file for the driver and software that you will need to install Canon PIXMA MP988 . If you do not have the file that you need, then you need to download it first from the official website of Canon.
- The second thing that you need is the USB cable that can connect your printer to the computer or laptop where the software will be installed. Make sure it is compatible, or you can use the cable from the package when you buy the printer.
If you already have all of those requirements above, then you just need to install Canon PIXMA MP988 using the setup file that you already have.
- The first thing that you need to do is turning on the laptop or computer where the software will be installed and your PIXMA MP988 .
- Before you do anything, you need to make sure that the USB cable is unplugged. That is because you will need to plug the USB cable later on, but not now.
- The next thing that you need to do is downloading the necessary setup file for your Canon PIXMA MP988 and run the file to start the installation program. You just need to follow all of the simple instructions when the installation program starts.
- After the installation is finished, you will be prompted to plug in the USB cable and you should do that. Soon after that, the program will automatically check on the USB cable connection automatically. After you plug in the cable, the installation will continue to the further process.
- You just need to follow the later instructions to finish the whole installation process.
- When all of the processes are finished, then the installation is finished too and you can start using your Canon MP988 for printing.
Method 2: Installing PIXMA MP988 Using Manual Driver Installation
If you want to install the printer using the manual installation, then you will need to pick the “Add a Printer” option that you can find on the setting or control panel of your computer. This is something that you can always have in your computer.
The things that you need are:
- You need to firstly have the driver setup for Canon PIXMA MP988 or the software setup to install the printer. You can find the specific link on the official website of Canon.
- The next thing that you need is the printer USB cable that will connect the printer to the computer or laptop.
Installation Steps:
- The first thing that you need to do is turning on the computer or laptop where you will install the software and the PIXMA MP988 printer.
- After that, you need to connect the USB cable from the printer to the computer.
- Once the cable has been connected, you will need to start extracting the data and setup file that you have downloaded for PIXMA MP988 .
- If you are running on Windows 7 or Vista for the operating system, then you will need to go to Control Panel and search for View Devices and Printer. For those who are running their computer on XP operating system, you need to find Fax and Printer options on Control Panel.
- Once you have found the main option, you will need to pick Add a Printer to start the installation.
- Before you start the installation process, you will need to lead the program to the extracted data file that the installation software needs. Therefore, take the tab to the location where you extracted the setup file earlier.
- After waiting for some time, you will notice that the printer has been installed on your computer and you are ready to use the PIXMA MP988 printer.
Method 3: Canon MP988 Software Installation Using Automatic Wizard
Simple steps of installing Canon PIXMA MP988 using the automatic wizard (using CD)
The things that you need are:
- First of all, you will need to have the CD/DVD drive to be installed on your computer. Most computers have this kind of device.
- The second thing that you need is the software CD for installing Canon PIXMA MP988 printer. The CD is usually included on the bundle package when you buy the printer.
- The third thing that you need is the USB cable that will connect PIXMA MP988 to the computer when you are installing the printer.
Follow these simple steps for installing your Canon PIXMA MP988 using the CD or automatic wizard.
- The first thing that you need to do is turning on the computer and your Canon PIXMA MP988 printer. Make sure you do not forget those things.
- You should not connect the USB cable from PIXMA MP988 to the computer now. That is because you will be prompted to do that later on.
- The next thing that you need to do is inserting the installation CD to your CD/DVD drive. After that, the CD will run automatically and start the automatic wizard to install Canon PIXMA MP988 . You just need to follow all of the instructions until the whole process is finished.
- When the automatic wizard prompts you to insert or connect the USB cable from PIXMA MP988 to your printer, then you will need to do so.
- Wait for the automatic wizard detects the USB cable after it is connected. When the wizard has detected the USB cable, you just need to follow the further steps.
- After few moments, you will get the finish notification. That means, your Canon PIXMA MP988 is already installed and ready to use.
Setup / Installation Canon PIXMA MP988 for Mac
- To begin the installation, you need first the respective file driver. So, download the file, prior, and at the time you think about the installation, trace the file that you save in particular folder. Or check your computer setting.
- Next, hit the downloaded file twice, and ensure that you mount the driver file on Disk Image.
- Afterward on the mounted Disk Image give another double click.
- And finally, apply two-time click on packaged drivel file. Just wait, since the installation will be automatically started.
That being said, depend on what platform that you use to install Canon PIXMA MP988 , the manual instructions for the installation and the other way around, can differ. The aforementioned installations procedures are applied on Mac and Windows 7. For Windows 8 or Windows XP, the driver file installation is pretty similar.
Posts
0 komentar:
Post a Comment